Vessel Supports Small vertical vessels may be supported by angle support legs, as shown in Figure 12-11. Larger vertical vessels are generally supported by a…
Author: and
Vortex Breaker As liquid flows out of the exit nozzle, it will swirl and create a vortex. Vortexing would carry the gas out with the…
Nozzles should be sized according to pipe sizing criteria, such as those provided in API RP 14E. The outlet nozzle is generally the same size…
Before the vessel fabrication can proceed, the fabricator will develop complete drawings and have these drawings approved by the representative of the engineering firm and/or…
Most companies have a detailed general specification for the construction of pressure vessels, which defines the overall quality of fabrication required and addresses specific items…
It is important to be able to estimate vessel weights, since most cost estimating procedures start with the weight of the vessel. The vessel weight,…
All ASME Code vessels are inspected by an approved Code inspector. The manufacturer will supply Code papers signed by the inspector. The nameplate on the…
The following formulas are used in the ASME Code Section VIII, Division 1 for determining wall thickness: Wall thickness—cylindrical shells Figure 12-1 defines the various…
The maximum allowable stress values to be used in the calculation of the vessel’s wall thickness are given in the ASME Code for many different…
The design pressure for a vessel is called its “Maximum Allowable Working Pressure” (MAWP). In conversation this is sometimes referred to simply as the vessel’s…