TEMA standards provide for two classes of shell and tube exchanger qualities. Class C is the less stringent and is typically used in onshore applications…
Category: Oil Handling Surface Facilities
The question always comes up of which fluid to put in the tubes and which fluid to put in the shell. Consider placing a fluid…
In selecting an exchanger, one must know the advantages and disadvantages of each type. The three basic types of shell-and-tube exchangers are fixed tube sheet,…
In addition to the type description code there is also a shorthand that is used for classifying heat exchangers. The first element of the shorthand…
There are many different arrangements of the shells, tubes and baffles in heat exchangers. Figure 3-6 is a list of TEMA standard classifications for heat…
As with vertical two-phase separators, a minimum diameter must be maintained to assure adequate gas capacity. In addition, vertical threephase separators must maintain a minimum…
For sizing a horizontal three-phase separator it is necessary to specify a vessel diameter and a seam-to-seam vessel length. The gas capacity and retention time…
In vertical separators, a minimum diameter must be maintained to allow liquid drops to separate from the vertically moving gas. The liquid retention time requirement…
For sizing a horizontal separator it is necessary to choose a seam-toseam vessel length and a diameter. This choice must satisfy the conditions for gas…
Re-entrainment is a phenomenon caused by high gas velocity at the gas-liquid interface of a separator. Momentum transfer from the gas to the liquid causes…