In specifying the size of a treater, it is necessary to determine the diameter (d), length or height of the coalescing section (Leff or h),…
Tag: Treaters
In order to develop a treater design procedure, the water droplet size to be used in the settling equation to achieve a given outlet water…
The oil must be held at temperature for a specific period of time to enable de-emulsifying the water-in-oil emulsion. This information is best determined in…
The specific gravity difference between the dispersed water droplets and the oil should result in the water “sinking” to the bottom of the treatment vessel.…
For most multi-well situations horizontal treaters are normally required. Figure 6-10 shows a typical design of a horizontal treater. Flow enters the front section of…
The most commonly used single-well lease treater is the vertical treater as shown in Figure 6-8. Flow enters the top of the treater into a…